Section 3 Run-time Operation Buttons
3BSE027630-600 B 33
Buttons
The following buttons are not application-specific and always have the same
function:
Press the Ok button if you want to save all data and close the graphical interface.
The DTM will then save the data for that application to the database and/or device.
If Cancel is pressed, the DTM will reject all data input (since the last time data was
saved/applied) and close the interface.
Press the Apply button to apply the number or text input and menu selections made.
The DTM will save all modifications made since the last time data was applied.
The interface remains open.
Press the Help button to access the Online Help for an application.
To Next Page
Loading...
