DP820 Section 3 Run-time Operation
140 3BSE027630-600 B
DP820
About DTM
See About DTM on page 39.
Identification
See Identification on page 40.
Dynamic Data
See DP820 Dynamic values on page 167.
Diagnosis
See Diagnosis on page 41.
Observe
The Observe control displays the dynamic for a module in online mode. It is
possible to update the value once or to read it cyclic with an interval of 30 s by
checking the corresponding check box. To stop the cyclic reading, press the Cancel
button.
To Next Page
Loading...
