Section 3 Run-time Operation DI840
3BSE027630-600 B 125
DI840
About DTM
See About DTM on page 39.
Identification
See Identification on page 40.
Dynamic Data
See DI801/DI810/DI811/DI814/DI828/DI840 Dynamic values on page 156.
Diagnosis
See Diagnosis on page 41.
Observe
See Observe on page 44.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
For configuration of the module, select the “Configuration” menu item.
To Next Page
Loading...
