Section 3 Run-time Operation AI830
3BSE027630-600 B 69
AI830
About DTM
See About DTM on page 39.
Identification
See Identification on page 40.
Dynamic Data
See AI801/AI810/AI815/AI830/AI835/AI845/AI890/AI893/AI895 Dynamic values
on page 151.
Diagnosis
See Diagnosis on page 41.
Observe
See Observe on page 44.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
Configuration consists of two tabs. The Module parameters tab shows the user
parameters for the module and the Channel parameters tab shows parameters for the
channels, i.e. Filter time and Signal range.
To Next Page
Loading...
