Input/Output Boxes Section 3 Run-time Operation
34 3BSE027630-600 B
Input/Output Boxes
The input/output boxes are used to display and input data (parameter values).
Depending on the meaning of the parameter, numerical values or character strings
can be entered. In some cases, these values must be selected from a list containing a
fixed number of default entries.
Input and output boxes are identified by means of the background brightness.
The DTM highlights the fields containing modified data. Pressing the Apply, Ok or
Cancel buttons and performing a save prompts the DTM to remove the highlighting.
When data is entered into an input box, the DTM checks the data format, value
ranges, etc. The data plausibility check can only be carried out once all data has
been entered. The DTM carries out the plausibility check once the Apply or Ok
button has been pressed. Entries that conflict with other entries on these user
interfaces are identified accordingly in the appropriate fields. They must be
corrected before the data can be applied.
To Next Page
Loading...
