3BSE027630-600 B 21
Section 2 Installation
System Prerequisites
The following are the prerequisites to install and operate S800 IO DTM version 6.0:
• Operating System (any of the following):
– Windows server operating system
– Windows client operating system
Refer to 3BUA000500 for more information.
• ABB FDT Shared Components:
– Version 14.0.0.x
• ABB FDT Base Container:
– Version 14.0.0.x
For remote I/O, a PROFIBUS master DTM is required (for example
A
C800F DTM).
To use the HART functionality together with the DTMs AI815, AI845, AI880,
AI895, AO815, AO845 and AO895, a HART DTM has to be installed (for example
Basic HART DTM).
The S800 I/O DTM version 1.0/0 and higher will not run in frame applications
conforming to version 0.98 of the FDT specification. The FDT versions differ in
the expanded number of interfaces, their meaning and data management.
To Next Page
Loading...
