3BSE027630-600 B 149
Appendix B Dynamic Data
The dynamic data is predefined for all units in S800 I/O DTM. Each connection, or
variable, is specified and explained in the tables below.
CI801 Dynamic values
This appendix is not applicable when using S800I/O DTM towards AC800M.
Signal
type
Data
type
Bit 07 Bit 06 Bit 05 Bit 04 Bit 03 Bit 02 Bit 01 Bit 00
Connection 1 Input Byte SW 0 0 0 RPB RPA 0 0
Abbreviation Description
SW Station warning. Set if any error exists in the FCI station including
modules.
RPB Redundant power B failure (opto extension).
RPA Redundant power A failure (opto extension).
To Next Page
Loading...
