DI830/DI831 Section 3 Run-time Operation
122 3BSE027630-600 B
DI830/DI831
This module requires CI840 and supports the SOE feature only with
AC870P/Composer. Contact ABB Local Supplier for the Composer version.
About DTM
See About DTM on page 39.
Identification
See Identification on page 40.
Dynamic Data
See DI830/DI831 Dynamic Values on page 161.
Diagnosis
See Diagnosis on page 41.
Observe
See Observe on page 44.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
For configuration of the module, select the “Configuration” menu item.
To Next Page
Loading...
