Section 3 Run-time Operation Diagnosis
3BSE027630-600 B 41
• Position
Shows the address information of the module. T
his number correspond to
the actual hardware position of the module including clust
er address.
If the Identification window is open and the position of the module is changed in
the Control Builder, the new position is not updated in the window. Close and
open the Identification window to view the updated position.
Function area
Describes hardware specific data for the module.
See the S800 I/O manuals for more detailed information about the functions of the
module.
Revisions area
• Hardware revision
This revision will be read from the
module and displayed in the text field in
online mode.
Diagnosis
The diagnosis control shows the status of the module. It displays information like
Module missing, Wrong module type and Internal channel error. The available
diagnosis can differ depending on the module type.
This function is not supported in all I/O modules.
To Next Page
Loading...
