Section 3 Run-time Operation AO890
3BSE027630-600 B 107
Channel parameters tab
The channel parameters tab shows the user parameters of the module. It shows
Signal range, OSP control and OSP value.
Channel area
Mark the Deactivate check box if the channel shall not be used.
Make the required choices in the Signal range and the OSP control drop-down
menus.
If the alternative “Set OSP value” is chosen, you can type your own value (0-100%)
in the OSP value text field.
Figure 48. AO890 - Configuration - Channel Parameters Tab
To Next Page
Loading...
