DI801/DI802/DI803/DI810/DI811/DI814/DI818/DI820/DI821/ DI828/DI890 Section 3 Run-time
116 3BSE027630-600 B
Observe
See Observe on page 44.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
Configuration consists of two tabs. The Module parameters tab shows the user
parameters for the module and the Channel parameters tab shows parameters for
separate channels.
Module parameters tab
The control looks the same for all modules but for the number of channels.
Power supervision area
Make the required choice in the Power supervision drop-down menu.
Figure 50. DI801/DI802/DI803/DI810/DI811/DI814/DI818/DI820/DI821/DI828/D
I890 - Configuration - Module Parameters Tab
To Next Page
Loading...
