AI843 Section 3 Run-time Operation
76 3BSE027630-600 B
Module parameters tab
Figure 32. AI843 - Configuration - Module Parameters Tab
Redundancy area
Mark the Redundancy check box if the unit shall be set for redundant operation.
This check box is only applicable for AI843 when configured via a CI840.
Grid Frequency area
Make the required choice in the Grid frequency drop-down menu.
Deactivate CJ channel area
Mark the Deactivate CJ channel check box if the Cold Junction channel shall not
be used and the supervision disabled.
Fix Junction Temperature area
Type the required value in the Fix Junction Temperature text field.
To Next Page
Loading...
