Section 3 Run-time Operation AI895
3BSE027630-600 B 87
HART device tab
The HART tab in the Diagnosis window is used for reading diagnosis about
the HART part of the module.
Device Status area
• Operations in progress
Shows an indication if one of the following operations is currently performed:
– Reset: Reset of the HART functionality.
– Rebuild: Collecting information about HART instruments (HART
command 0 performed).
– Scan_enabled: Normal operation if scanning is enabled.
– Self test: A check sum verification on HART non-volatile parameters is
performed.
Figure 39. AI895 - Diagnosis - HART device tab
To Next Page
Loading...
