Section 3 Run-time Operation AI895
3BSE027630-600 B 93
General area
• Number of retries (busy response)
Writes the selected number of retries to t
he module. This affects the
communication between the module and the HART instrument. Valid numbers
are 0 - 10. This applies for a busy response.
If the communication with the HART instrument fails when the default value is
used, increase the value to ensure a better performance.
• Number of retries (other error)
Writes the selected number of retries to t
he module. This affects the
communication between the module and the HART instrument. Valid numbers
are 0 - 10. This applies for other error.
Service
The service control is used for sending special functions (commands) to the HART
part of the I/O module.
To Next Page
Loading...
