Debugger Software (for Microsoft Windows) E-OCD II Debugger User’s Manual
30
8) Download
: Downloads the selected hex file to the target device and starts programming its flash
memory.
9) Close
: Closes the dialog box. If the target device has configurations, the Configuration dialog box
below is opened.
10) Configurations
: To activate the device configuration :
a. Write the configuration.
b. Power off the target system.
c. Power on the target system, and the device will catch the configuration data while the
power applied to it is rising to the operating voltage.
Figure 3-18 Configuration Dialog Window
To Next Page
Loading...