Abov E-OCD II - Adding Debugger Control to Project

Keil Plug‐in E-OCD II Debugger User’s Manual
80
4.2.3 Add Debugger Control to Your Project
Set your project options as shown in the following dialog box. Now, you can emulate and debug your
target MCU.
If you are not using code banking, use ‘ABOV E-OCD II Dongle.’
Figure 4-4 ABOV E-OCD II Dongle
If you are using code banking, use ‘ABOV E-OCD II Banked.’
Figure 4-5 ABOV E-OCD II Banked