Abov E-OCD II - Page 43

E-OCD II Debugger User’s Manual Debugger Software (for Microsoft Windows)
43
5) When the device is not recognized by the own power of E-OCD II,
the user must use an external power.
6) Connecting target board with the power of E-OCD II is on, it may cause breakage of the
target board.
7) Connecting E-OCD II with the power of target board is on, it may cause breakage of E-OCD
II.
8) User must connect the E-OCD II to target board with both power off.
9) E-OCD II support USB HID so it does not require a dedicated USB driver.
10) The PC program of the E-OCD II is same as current OCD program.