EasyManua.ls Logo

Abus SECVEST - Page 69

Abus SECVEST
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6868 69|
15. Technical data
Electromagnetic compatibility
EMC – immunity
Complies with EN 50130-4
Electromagnetic compatibility
EMC – interference
Complies with EN 61000-6-3
Electrical safety
Complies with EN60950-1
Power supply
Type of power supply
Type A (EN 50131-1 Section 9 and EN 50131-6 Section 4.1)
Secvest has an integrated power supply unit (Type A). This power supply
unit supplies dierent internal voltages to the circuit board to supply
power to the circuitry.
This power supply unit supplies 13.8V with a maximum of 700mA
atthe 0V/12V AUX output.
Normal voltage/frequency
110V/230VAC, 50/60Hz, (85-265VAC, 50/60Hz)
13.8VDC (13.0–14.5VDC)
Power consumption, maximum
I AC MAX:
430mA rms @ 85VAC
190mA rms @ 230VAC
170mA rms @ 265VAC
Power consumption, nominal
6.9W
6.9W x 24 x 365 = 60kWh per year
55mA rms @ 230VAC
specied with 200mA aux load and fully charged batteries
300mA @ 13.8V
External DC input fault triggered at
12.5V
OK at 12.7V
External PSU
13.0–14.5VDC, at least 1.7A
Power consumption, typical
Alarm panel standby: 100mA
Backlighting o
Backlighting:
High: 100mA
Medium: 40mA
Low: 15mA
Internal siren sounding alarm at maximum volume: 70mA
GSM standby:15mA
GSM in use: 140mA
Battery charging current per battery: 220mA

Table of Contents

Other manuals for Abus SECVEST

Related product manuals