Chapter 1, Accu-Chek Smart Pix System overview
Accu-Chek Smart Pix user's manual
1-5
1.3 Overview of the Accu-Chek Smart Pix status indicator signals
The Accu-Chek Smart Pix system indicates various operating
states on the status indicator on top of the device. The
following signals can appear on this indicator:
7
Off:
The Accu-Chek Smart Pix device is not connected to
a computer, or the computer is not switched on.
8
Centre of status indicator
• Lit continuously: report is ready on the computer,
idle state.
• Flashing slowly: error
9
Top/bottom dots
• Flashing simultaneously about once a second: device
is ready for operation and is actively searching for
meters or insulin pumps.
• Flashing fast simultaneously: data transfer
10
Left/right dots
• Flashing slowly simultaneously: processing report
data
Software updates for the Accu-Chek Smart Pix
system can be installed via the computer. While such
an update is being installed, the centre of the status
indicator
8
and (simultaneaously) the dots
9
and
10
flash alternately.
To Next Page
Loading...