Chapter 3, Preparing the devices
Accu-Chek Smart Pix user's manual
3-13
3.10 Accu-Chek Performa/Performa Nano
The Accu-Chek Performa/Performa Nano meter has a built-
in infrared port for data transfer. In order to read data from
these devices, proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Switch the meter on by keeping the and
buttons pressed simultaneously until two alternately
flashing arrows appear on the display. Data transfer
starts automatically.
To Next Page
Loading...
Need help?
General