Chapter 3, Preparing the devices
3-4
Accu-Chek Smart Pix user's manual
3.1 Accu-Chek Active
The Accu-Chek Active meter has a built-in infrared port for
data transfer. In order to read data from these devices,
proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Switch the meter on by keeping the
M
button pressed
for more than 3 seconds.
• The display shows “PC”, and data transfer starts
automatically.
To Next Page
Loading...