Chapter 3, Preparing the devices
3-8
Accu-Chek Smart Pix user's manual
3.5 Accu-Chek Compact Plus
The Accu-Chek Compact Plus meter has a built-in infrared
port for data transfer. In order to read data from these
devices, proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Switch the meter on by pressing the
S
and
M
buttons
simultaneously. The device is now switched on and in
data transfer mode, without advancing a new test
strip.
• The display shows two arrows, and data transfer starts
automatically.
To Next Page
Loading...