Chapter 3, Preparing the devices
Accu-Chek Smart Pix user's manual
3-5
3.2 Accu-Chek Aviva/Aviva Nano
The Accu-Chek Aviva/Aviva Nano meter has a built-in
infrared port for data transfer. In order to read data from
these devices, proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Switch the meter on by keeping the and
buttons pressed simultaneously until two alternately
flashing arrows appear on the display. Data transfer
starts automatically.
To Next Page
Loading...