Chapter 3, Preparing the devices
Accu-Chek Smart Pix user's manual
3-3
All the descriptions below are based on the following
assumptions:
• The Accu-Chek Smart Pix device is already plugged
into the computer.
• The computer is switched on and the operating
system is running.
• The Accu-Chek Smart Pix device is ready for data
transfer when the top/bottom dots flash slowly (about
once a second).
• If you have already opened the
START.HTM
file in the
browser, you will see the picture shown on the left
(search mode).
To Next Page
Loading...