Chapter 4, Accu-Chek Report
Accu-Chek Smart Pix user's manual
4-17
In addition to the graphical display, you will also find
statistical information on the values which were included in
the analysis. These are:
•
Evaluated results:
Number of evaluated blood
glucose results in the period selected.
•
BG test frequency:
Average number of blood
glucose tests per day for
each day
of the selected
period. In addition, the statistical information also
contains the value (in brackets)
for those days only
on which a test was performed at least once.
•
Mean BG (MBG):
Mean value from all analysed
results.
•
Standard deviation (SD):
Standard deviation or
variance of the analysed results.
•
SD/MBG:
This value indicates the variation of the
blood glucose levels with reference to the mean value.
If the mean value is in the desired range, a ratio of less
than 50 % (or better: 30 %) indicates a desirable low
variation and thus a good metabolic control.
•
MBG (before/after meal):
Mean value from all
results which have been obtained before or after
meals and have been flagged in the meter accordingly.
Values are displayed only when appropriate
information is stored in the meter.
•
High/low BG index:
These figures represent the
frequency and the resulting risk of blood glucose
levels being too low or too high (see literary
references on page 4-43). Figures should be as low as
possible.
To Next Page
Loading...
Need help?
General