EVO 150 Controller
35
Web Server IP Address – 1
st
Octet
8 6 1 9 2
This parameter sets the 1
st
Octet of the controller boards IP Address.
The default value is 192.
Range: 0 to 255
Note: This is not the address for the fieldbus, see page 103.
Web Server IP Address – 2
nd
Octet
8 7 1 6 8
This parameter sets the 2
nd
Octet of the controller boards IP Address.
The default value is 168.
Range: 0 to 255
Note: This is not the address for the fieldbus, see page 103.
Web Server IP Address – 3
rd
Octet
8 8 0
This parameter sets the 3
rd
Octet of the controller boards IP Address.
The default value is 0.
Range: 0 to 255
Note: This is not the address for the fieldbus, see page 103.
Web Server IP Address – 4
th
Octet
8 9 8
This parameter sets the 4
th
Octet of the controller boards IP Address.
The default value is 8.
Range: 0 to 255
Note: This is not the address for the fieldbus, see page 103.
Web Server Subnet Mask – 1
st
Octet
9 0 2 5 5
This parameter sets the 1
st
Octet of the controller boards Web Serve
Subnet Mask. The default value is 255.
Range: 0 to 255
Note: This is not the subnet mask for the fieldbus, see page 103.
Web Server Subnet Mask – 2
nd
Octet
9 1 2 5 5
This parameter sets the 2
nd
Octet of the controller boards Web Serve
Subnet Mask. The default value is 255.
Range: 0 to 255
Note: This is not the subnet mask for the fieldbus, see page 103.
Web Server Subnet Mask – 3
rd
Octet
9 2 2 5 5
This parameter sets the 3
rd
Octet of the controller boards Web Serve
Subnet Mask. The default value is 255.
Range: 0 to 255
Note: This is not the subnet mask for the fieldbus, see page 103.