3-6 Machine Maintenance Procedures
Pre-disassembly Instructions 0
Do the following prior to starting any maintenance procedures:
1. Place the system on a stable work surface.
2. Remove the power adapter from the USB Type-C port (A) as shown in Figure 3-1 or
from the USB Type-C port (C) as shown in Figure 3-2.
3. Remove the microSD card from the microSD card slot (B) (Figure 3-1).
4. Remove all cables from system.
Figure 3-1. AC Adapter Outlet & microSD Card Slot
5. [For C732L & C732LT only] Remove the USIM card from the USIM card slot (D)
(Figure 3-2).
Figure 3-2. USIM Card Removal
Make sure the system is completely powered off.
To Next Page
Loading...
