ACTi PMON-2000 - Page 12

www.acti.com
Product Manual
12
Item
Description
17
USB Port
Connects to a USB device for data storage or to update
the device firmware.
18
Memory Card Slot
Insert a memory card into this slot for data storage.
19
LAN Port / PSE Input
Connects to a Power Supply Equipment (PSE) input,
which can be used to provide DC 48V power to the IP
camera connected to the PoE Output port. To enable this
function, the Power Bank Switch must be “ON”.
20
LAN Port / PoE Output
Connects to an IP Camera. This port provides
Power-over-Ethernet (PoE) output that can power up the
camera.
21
Power Bank Switch
Slide the switch to turn the power bank function on or off.
When switched on, the PSE input connected to the PSE
IN port will supply power to the camera which is connected
to the PoE OUT port.