GR 2400 Series Specifications:
Dimensions:
32 Relays : 25.5" High, 20" Wide, 6" Deep
48 Relays : 37.5" High, 20" Wide, 6" Deep
Enclosure: Nema 1 Surf ace or Flush
Wire: 90 C or above copper wire only.
Number of Relays:
GR 2432: Up to 32 relays
GR 2448: Up to 48 relays
(Note: Two Pole relays take up 2 Single
Pole Relay Spaces
Relays:
SnapLink NO Relay
277Vac at 20 amps Ballast and Tungsten
Rated 100,000 Throws
SnapLink NC Relay
277Vac at 20 amps Ballast and Tungsten
Rated 100,000 Throws
Snaplink 2 pole Relay NO
600V at 20 a mps Ballast and Tungsten
Rated 100,000 Throws
Snaplink 2 pole Relay NC
600V at 20 amps Ballast and Tungsten
Rated 30,000 Throws
Snaplink @Zero Relay
277Vac at 20 amps Ballast and Tungsten
Rated 250,000 Throws
Snaplink SoftStart Relay
120Vac at 20 amps Ballast and
Tungsten
Rated 100,000 Throws Brings on
load to 1/3 power for approx 1/3
sec bef ore closing the main contact.
Environment:
Temperature of Ambient outside Panel
35 to 105 degrees F
Humidity 10 to 90%
Non condensing.
GR 2400/1400 Bus.
Max Length
4000 f t
Minimum Voltage at any switch or other
device on the bus that does not have its own
transformer: 9 Volts Dc
Type of wire for most applications:
Cat 5 4 twisted pair with RJ 45 connectors.
Add 2 #18 or better to prevent voltage drop in
systems with many switches or long runs.
Page 63
To Next Page
Loading...
Need help?
General