GR 2400
BASIC PROGRAMMING GUIDE
Programming Guide Index
Introduction................................... 2
Navigation Basics.............................. 3
Programming a Digital Switch
................. 4
Adding or Deleting Loads...................... 5
Basic Photocell Settings...................... 6-7
Editing Time Schedules ........................ 8
Schedule Types & Trigger Events
............... 9
Control Types & Group Types..................10
Programming Groups.........................11
Important Note:
This programming guide covers the basics—programming switches, schedules and photosensors. Other manuals
exist for more advanced programming issues. Call us if you have questions or need assistance during the
programming of your system. Technical Support: 800-345-4448
To Next Page
Loading...
Need help?
General