Acuity Controls GR2400 User Manual

Pg. 2 www.lightingcontrols.com
INTRODUCTION
Introduction: Almost all of the devices in the GR
2400 Lighting Control System are digital, meaning
they are part of a peer-to-peer network and can
be programmed. It is important to understand
from the outset that you eect almost any change
through programming alone.
This programming guide covers the basics—
programming switches, schedules and photocells.
Other manuals exist for more advanced
programming issues.
Additionally, help is only a call away. If equipped
with a modem, we can dial into your system and
program it for you, at no cost. Call us any time at:
(800) 345-4448.
The DTC (Digital Time Clock): Most
programming is done from the DTC Clock (shown
below)/Programmer located in the master
Lighting Control Panel (LCP).
Virtual Clock or Unity Lighting Control software
allows remote connection via the internet or
modem to the DTC.
Use to
position the
cursor
Scroll
through
choices in
one eld
Exit out
of a menu
Select an
item or
enter a
sub-menu
Deletes programming or
information about an item
(use with caution)
Increases/decreases
contrast of display screen
Cursor
72

Acuity Controls GR2400 Specifications

General

Brand	Acuity Controls
Model	GR2400
Category	Relays
Language	English