151
uuLocking and Unlocking the DoorsuKey Types and Functions
Continued
The built-in key can be used to lock/unlock the
doors when the keyless access remote battery
becomes weak and the power door lock/
unlock operation is disabled.
To remove the built-in key, slide the release
knob and then pull out the key. To reinstall
the built-in key, push the built-in key into the
keyless access remote until it clicks.
■
Built-in Key
Models without two-way keyless
access remote
Models with two-way keyless
access remote
Built-in Key
Release Knob
Built-in Key
Release Knob
21 ACURA RDX-31TJB6210.book 151 ページ ２０２０年６月１６日 火曜日 午後１２時３９分
To Next Page
