Acura RDX 2021 - Page 565

563
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
Maintenance
7. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
8. Install the end of the wiper blade into the
cap.
9. Slide the holder onto the wiper arm until it
locks.
10. Lower both wiper arms.
11. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
Holder
Wiper
Blade
Cap
21 ACURA RDX-31TJB6210.book 563 ページ ２０２０年６月１６日 火曜日 午後１２時３９分