612
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
13. Turn off the kit.
u Check the pressure gauge on the air
compressor.
u If overinflated, press the pressure relief
button.
14. Unplug the kit from the accessory power
socket.
15. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
16. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
17. Repackage and properly stow the kit.
21 ACURA RDX-31TJB6210.book 612 ページ ２０２０年６月１６日 火曜日 午後１２時３９分
To Next Page
