82
uuIndicatorsu
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
• After you have set the power mode
to ON, the vehicle performs system
checks. However, if the readiness
codes have not been set by that
time, this indicator will blink five
times and then go off.
• Comes on if there is a problem with
the emissions control systems.
• Blinks when a misfire in the
engine’s cylinders is detected.
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 645
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes or
more, and wait for it to cool down. Then,
take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 621
21 ACURA RDX-31TJB6210.book 82 ページ ２０２０年６月１６日 火曜日 午後１２時３９分
To Next Page
Loading...
