96
uuIndicatorsu
Indicator Name On/Blinking Explanation Message
Road
Departure
Mitigation
(RDM) Indicator
●
Comes on if there is a problem with
RDM.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 409
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when RDM shuts itself
off.
●
Indicator may come on temporarily when
passing through an enclosed space, such
as a tunnel.
●
The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth. Indicator may take
some time to go off after the radar sensor
is cleaned.
●
Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.
2 Radar Sensor P. 497
21 ACURA RDX-31TJB6210.book 96 ページ ２０２０年６月１６日 火曜日 午後１２時３９分
To Next Page
Loading...
