55 AIMB-276 User Manual
Chapter 3 BIOS Operation
Network Stack [Disabled]
3.2.2.10 CSM Configuration
Boot option filter [UEFI only]
Network [UEFI]
Storage [UEFI]
Video [UEFI]
Other PCI device [UEFI]
Note! When network stack [enable]
item must enable :LANx PXE OpROM [enable]
Note! If your HDD or other boot device is installed as Legacy mode, it may
cause blue screen situation. There are 2 ways to solve this:
1. Re-install your OS as UEFI Mode
2. Change all of settings above as " Legacy"
* Boot option filter-> Legacy Only
* Network -> Legacy
* Storage -> Legacy
* Video -> Legacy
* Other PCI devices -> Legacy
To Next Page
Loading...
