a.2. Discover devices with Amazon Alexa
Alexa will automatically discover devices you already have connected to your app, and will add new devices for
voice control as soon as they are connected to Aeotec Smart Home Hub or SmartThings.
a.3. Voice commands to Amazon Alexa
Now you’re done with setup and ready to use Alexa’s hands-free voice control for your Smart Home Hub devices.
The general format for voice control will typically be "Alexa, (COMMAND) (DEVICE NAME)".
Try these voice commands:
“Alexa, turn on/off the bedroom light.”
“Alexa, dim/brighten the kitchen light.”
“Alexa, set the bedroom light to 10.” (Brightness can be modified on a scale of 0 - 100.)
“Alexa, turn the patio lights to blue.”
“Alexa, is the bedroom window open?”
“Alexa, turn the desk light to reading.”
“Alexa, set the kitchen light to soft white.”
“Alexa, raise/lower kitchen thermostat by 10 degrees.”
“Alexa, set kitchen thermostat to 70 degrees.”
“Alexa, what is the temperature in my home?”
“Alexa, what is my thermostat set to?”
“Alexa, is the front door open?”
“Alexa, lock my front door.”
“Alexa, is the back door locked?”
“Alexa, turn on theater mode.” (Scenes can be executed just like turning on a switch.)
If you mess up in any point of your phrase, just state "Nevermind" and re-say your command again.
a.4. Disconnect Smart Home Hub from Amazon Alexa
To Next Page
Loading...
Need help?
General