b.3. Voice commands to Google Assistant
Now you’re done with setup and ready to use Google Assistant hands-free voice control for your Smart Home
Hub devices. The general format for voice control will typically be "Ok Google, (COMMAND) (DEVICE
NAME/ROOM)".
General phrase:
“Ok Google, turn on/off all lights.”
“Ok Google, turn on/off all switches.”
“Ok Google, turn on/off everything in the kitchen.”
“Ok Google, dim/brighten the lights in the living room.” (This will adjust the brightness by 20%)
“Ok Google, set the bedroom light to 10%.” (Brightness can be modified on a scale of 0-100%.)
“Ok Google, dim/brighten the bathroom light by 50%.”
“Ok Google, turn lights in the game room green.”
“Ok Google, turn on/off everything.”
“Ok Google, is the patio light on?”
“Ok Google, is the children’s light off?”
Scene phrases:
“Ok Google, run Good Morning.”
“Ok Google, activate Movie Time.”
Thermostat phrases:
“Ok Google, set the living room thermostat to 70.”
“Ok Google, turn the thermostat up/down 5 degrees.”
“Ok Google, make it warmer/cooler.” (This will adjust the temperature by 2 degrees.)
“Ok Google, turn on the heat/cooling.” (This will change the mode and/or turn the thermostat on)
“Ok Google, turn thermostat to heat-cool mode.”
“Ok Google, turn off the thermostat.”
“Ok Google, what’s the temperature inside?”
“Ok Google, what’s the thermostat set to?”
Sensor phrases:
“Ok Google, is my front door open?”
“Ok Google, is my bedroom window open?”
"Ok Google, what temperature is the kitchen motion sensor?"
"Ok Google, what is the temperature of the back door?"
To Next Page
Loading...
Need help?
General