AERMEC SAF - Reception; Preliminary Warnings; Checking on Arrival; Handling with Packaging

SAF_5523451_09
10
RECEPTION
PRELIMINARY WARNINGS
Complaints must be made within 8 days of receipt; reports after
this date are invalid.
Interpose protections and spacers to prevent damage to the
unit.
Do not place any objects on top of the package.
Remove the packaging only when the equipment is in installa-
tion position.
Dispose of packaging parts responsibly and do not leave them
within the reach of children as they are potential sources of dan-
ger; dispose of the packaging in accordance with the regulations
in force in the country.
The pallet supplied with the machine is not intended for other
uses and must be disposed of according to the regulations in
force in the country.
CHECKING ON ARRIVAL
Before accepting the delivery, make sure:
– The unit has not been damaged during transport
– The delivered equipment corresponds to what is indicated on
the transport document by comparing the data with Packag
-
ing Plate '1'.
In case of damage or anomalies:
– Note the damage on the transport document immediately
and write: "Received with obvious loss/damage due to trans-
port".
– Dispute via fax and registered mail with return receipt to the
carrier or supplier.
HANDLING WITH PACKAGING
The equipment is supplied on wooden pallets protected by card-
board packaging.
Lifting with forks
Insert the forks from the side so as not to damage the product.
Lifting with crane
Position the lifting straps as shown in the gure.
Use spacers to prevent damage to the unit.
REMOVING THE PACKAGING
Cut the xing straps.
Remove the cardboard packaging, lifting it upwards.
Remove any protective inserts.
Remove the plastic wrap around the machine.
1. Packaging plate
1