AERMEC SAF - Machine Identification; Recommended Equipment

SAF_5523451_09
6
MACHINE IDENTIFICATION
The equipment can be identied by:
– Packaging plate.
It bears the equipment identication data.
– Feature plate.
Secured to the machine, it bears the equipment technical and
performance data. In case of loss or deterioration, request a du-
plicate from the technical service centre.
Tampering, removal, deterioration of identication tags makes it
dicult to carry out any installation or maintenance and request
spare parts.
RECOMMENDED EQUIPMENT
To install the equipment, it is advisable to use the following
equipment:
– Set of Phillips head and at head screwdrivers;
– Wire cutters;
– Scissors;
– Set of open end spanners and pipe wrenches;
– Ladder;
– Hydraulic material to apply gaskets to the threading;
– Electric equipment for connections;
– Cut resistant gloves.
1. Packaging plate
2. Feature plate
2
1
1. Packaging plate
2. Feature plate
1
2