SAF_5523451_09
13
HYDRAULIC CONNECTIONS
PRELIMINARY WARNINGS
For detailed information (dimensions, weights, technical speci-
cations, etc) please refer to the information chapter.
Install an input lter (under penalty of voiding the warranty.)
The lter must be sized to ensure the ow rates necessary for the
equipment.
In case of impurities in the water, periodically service the lter.
Install both input and outlet shut-o valves.
Provide a tap to drain the tank.
Make sure that the weight of the pipes does not bear on the
structure of the machine.
INTERNAL CIRCUIT DIAGRAMS
SAF
1. owmeter with integrated temperature sensor
2. DHW heat exchanger
3. Manual air vent
4. Primary pump
1
2
3
4
DHW USER SIDE
TECHNICAL
WATER SIDE
STORAGE
To Next Page
Loading...
