AERMEC SAF - Machine Description; Accessories

SAF_5523451_09
8
MACHINE DESCRIPTION
SAF is the new system that combines the functions of inertial accu-
mulation and boiler for instant domestic hot water production, in a
single integrated product designed to receive heat from any source
type.
All the system components: carbon steel thermo-accumulator; plate
inverter and plate heat exchangers for instant D.H.W. production,
variable ow rate high eciency pump are contained within a single
unit for easy installation even in conned spaces.
The range includes seven dierent models that dier in their ther-
mal storage capacity: 200, 300 or 500 l.
SAF is available in three versions, ideal for new buildings, renova-
tions and existing buildings to more eectively respond to the dif-
ferent needs of users:
SAF°, thermal buer powered by a single energy source, inte-
grated plate heat exchangers for instantaneous production of
DHW, high eciency circulator inverter and control electronics
adjustment.
SAF T, this version is equipped with a coil immersed in the stor-
age for the integration of an auxiliary heat source (boiler/re-
place).
SAF S, this version is set up for the use and the complete man-
agement of an additional source (solar, pellet boilers, etc). In
addition to the specially-designed extra coil, the system also
includes a circulator dedicated to the supplementary source,
along with control software designed to manage it.
SAF INTEGRATION WITH AERMEC HEAT PUMPS AND COMPATIBILITY WITH OTHER ACCESSORIES
(1) Range designed for the management domestic hot water: AER485P1 and VMF-E5 accessories not required
* To be installed on board of the heat pump
Heat pumps Sizes Vers. note SAF MOD485K MODU485-BL* VMF-E5 VTV160 KRX-SAF
ANL 020-202 H • • • • • •
ANLI 101 All (1) • • • • • •
ANK 020-150 All • • • • • •
NRK 090-150 All • • • • • •
CL 025-200 H • • • • • •
ANKI 020-080 All (1) • - - - • •
WRL 026-161 H (1)
• - - - • •
WRL 026-161 HT (1) • - - - - •
ACCESSORIES
• VTV160: 3-way diverter sector valve, complete with 2-point
actuator (Kvs = 16).
• MOD485K: RS-485 interface for supervision systems with
MODBUS protocol.
• MODU-485BL: RS-485 interface for supervision systems with
MODBUS protocol.
• VMF-E5: recessed panel with backlit graphic
LCD display and capacitive keypad, for centralised
command/control of a complete hydronic system.
• KRX-SAF: Supplementary resistance with 230V/1/50 Hz 1200W
regulation thermostat
• COMPATIBILITY WITH VMF SYSTEM
For further information on system, refer to specic documenta-
tion.