AERMEC SAF - Main Features

SAF_5523451_09
7
SAF INSTANTANEOUS DHW PRODUCER WITH INTEGRATED ACCUMULATION TANK
• SAF is an innovative whole “plug and play” system - an instanta-
neous producer of domestic hot water with an elegant, original
design.
• Suitable for heating systems powered by one energy source or
more (traditional boiler, heat pump, biomass boiler, solar pan-
els, etc.), it guarantees the instantaneous production of domes-
tic hot water at the temperature set by the user, and with limited
scale formation. Heat exchange is ensured by a plate exchanger
in AISI 316 stainless steel guaranteeing optimum hygiene and
excellent performance. The heat exchanger is combined with a
heat accumulation tank that supplies it with energy. The system
contains all the necessary components, and has a control unit
with graphic display so that the user can monitor operation and
easily set the working parameters.
• The heart of the SAF system is its particular electronic adjust-
ment, guaranteeing that the required DHW temperature is
reached and maintained by modulating the ow rate on the
primary circuit.
THIS GUARANTEES:
• the maximum thermal head on the primary circuit, to optimise
generator eciency (heat pump, solar panels, biomass, etc.)
• accurate, reliable adjustment
Thanks to the rst-class eciency of the heat exchange system, this
module is ideal for residential or commercial installations powered
by a heat pump or even with solar panels, and using low-tempera-
ture accumulation (50-55°C).
3
7
4
1
2
5
6
MAIN FEATURES
• High exchange eciency in systems with a discontinuous gen-
erator or at low temperatures
• Easy, cost-eective use
• Ecient even at low ow rates (minimum 2 litres/min)
• Maximum hygiene in anti-legionella mode
• Highly precise temperature adjustment
• High-eciency circulation pump (complying with the 2005/32
EC directive) with electronic rpm adjustment
• Graphic display showing the system and power yield tempera-
tures
• Space saving compared with the exchanger + remote accumu-
lation solution
• Cost-eective installation
• Plug and Play system
• Very thick, rigid insulation in injected PU with low thermal dis-
persion (energy class B)
• Monobloc structure with an original,
• attractive design and nishing touches that make it a furnishing
element
• “All-in” integration with other generators (for suitable versions)
• Specic, supplementary solar module
KEY
1 Heat accumulation tank
2 Coil (S and T versions)
3 Heat exchanger for DHW
4 Flow rate/temperature gauge
5 Electric panel
6 Electronic regulator
7 Circulation pump