AERMEC SAF - General Warnings; Permissible Use; Remarks; Fundamental Safety Rules

SAF_5523451_09
5
GENERAL WARNINGS
Permissible use
Read this sheet carefully.
The documentation supplied with the unit must be delivered to
the owner to keep it with care for any future maintenance or as-
sistance.
The company declines all contractual and non-contractual li-
ability for damage to persons, animals or things, due to incor-
rect installation, adjustment and maintenance, to improper use
or to partial or supercial acquaintance with the information
contained in this manual; furthermore, in its quest to continu
-
ally improve its products, the company reserves the right to alter
the data expressed at any time and without notice and shall not
be liable for any inaccuracies contained in this booklet, if due to
printing or copying errors.
These devices were designed for domestic hot water produc-
tion. Other applications that are not expressly authorised by the
are to be considered improper and, therefore, not allowed.
The location, hydraulic and electrical system must be estab-
lished by the designer and should take into account both the
purely technical needs of any local laws in force and of specic
authorisations.
All work must be done by expert qualied sta, aware of the
Standards in force on this subject in dierent countries.
Upon delivery of the goods by the carrier, check the integrity of
both the packaging and the units; should there be any damage
or missing components, note it on the delivery note and send
a formal complaint to the company by fax or registered letter
within 8 days from when the goods were received.
The warranty is void if:
the personnel authorised by the company is not present when
the device is commissioned.
– in the event of failure to comply with the above-mentioned
instructions.
Remarks
Keep the manual in a dry place, in order to prevent deterioration,
for at least 10 years for any further reference.
Pay particular attention to the user regulations accompanied by
“danger”, “prohibition” or “obligation” in so much as, if not com-
plied with, the unit or objects may be damaged and/or persons
injured.
The manufacturer declines all responsibility for any damage due
to improper use of the machine, partial or hasty reading of the
information contained in this manual.
• The appliance must be installed in such a way as to make main-
tenance and/or repairs to be carried out possible.
The appliance warranty does not cover the costs for ladders,
scaolding, or other elevation systems that may become neces-
sary for carrying out servicing under warranty.
The manufacturer does not issue drawings or specications of
the connection systems.
Any exceptions to the requirements contained in this manual
must be approved in writing by the manufacturer's technical
support.
For anomalies not contemplated by this manual, contact the
After-sales Service as soon as possible.
Fundamental safety rules
We remind you that the use of products that employ electrical en-
ergy and water requires that a number of essential safety rules be
followed, including:
This appliance must not be used by children and unaided disa-
bled persons.
It is prohibited to touch the appliance when you are barefoot
and with parts of the body that are wet or damp.
It is prohibited to perform any cleaning operation before hav-
ing disconnected the electrical mains by positioning the system
master switch to "o".
It is prohibited to modify the safety or adjustment devices with-
out authorisation and instructions from the manufacturer.
It is prohibited to pull, detach or twist the electrical cables com-
ing out of the unit even if it is disconnected from the electrical
mains.
It is prohibited to open the doors for accessing the internal parts
of the appliance unless the system is o via master switch.
It is prohibited to climb onto the unit, sit on it and/or rest any
type of object on it.
It is prohibited to spray or jet water directly onto the unit.
It is prohibited to disperse, abandon or leave the packing materi-
als (boxes, staples, plastic bags, etc.) within the reach of children,
as they are a potential source of danger.
Observe safety distances between the machine and other equip-
ment or structures to ensure sucient access space to the unit
for maintenance and/or assistance as indicated in this manual.
(see the chapter on technical spaces).
Powering the unit: must be through the cable provided on the
unit and connected to a wall socket appropriate to the voltage
values and absorption of the appliance.
The hydraulic connection should be made according to the in-
structions in order to ensure the unit operates properly.
If the unit is not running during the cold season, empty all the
machine hydraulic circuits to keep them from freezing.
Handle the drive with the utmost care, avoiding damaging it.
INSTRUCTIONS FOR THE USER
Keep this manual along with wiring diagram in a place that is
accessible to the operator.
Write down the unit identication data so that you can provide
them to the service centre should you need to request service
(see the “machine identication” paragraph).
We recommend keeping track of service done on the unit, as this
will facilitate any potential troubleshooting.
In case of failure or malfunction:
– check the type of alarm to notify the Service Center;
– turn o the unit immediately without resetting the alarm;
– contact an authorised service centre;
– request the use of only original spare parts.
Ask the installer to be trained on:
– switch-on/o;
– extended shutdown
– maintenance;
– what to do/not to do in the event of a fault.