Chapter 9 BR200 and BR200-WP Routers
90 Aerohive
PRODUCT OVERVIEW
Aerohive BR200 series routers are a critical component of the Branch-on-Demand solution, which allows
enterprises to provision branch office networks and teleworkers quickly and easily. Aerohive BR200 series
routers are available in two models: the BR200-WP and the BR200. The BR200-WP provides LAN and WLAN
connectivity and PoE (Power over Ethernet) support. The BR200 provides LAN and WAN connectivity.
The BR200-WP router has a single dual band 2.4/5 GHz (802.11b/g/n) radio, three embedded antennas with
diversity, one WAN port (ETH0), four LAN ports (ETH1 through ETH4), a Console Port, and a USB port for WAN
connection redundancy. The BR200 series routers support up to 16 SSIDs (BR200-WP only), 16 VLANs, 16
networks, and 64 user profiles across both wired and wireless interfaces. Figure 1 shows the BR200 series
router hardware components. Each component is described in Table 1 "BR200 series routers component
descriptions" on page 91.
Figure 1 The BR200 series router hardware components
Device status LED
Top views
Link status
LEDs
Security
connector
USB
port
Reset
button
WAN
port
Power
connector
48V (1 25A)
ETH1/PoE ETH2/PoE ETH3 ETH4 WAN/ETH0 Console
USB Reset
10/100/1000 Base T
Console
port
48V (1 25A)
ETH1 ETH2 ETH3 ETH4 WAN/ETH0 Con ole
USB Res t
10/100/1000 Base T
BR200-WP
BR200
PoE status
LEDs
Link status LEDs
LAN ports
To Next Page
Loading...
