Agilent Technologies 1260 Infinity II Refractive Index Detector User Manual

Agilent InfinityLab LC Series RID User Manual 193
13 LAN Configuration
Manual Configuration
3
Type
? and press enter to see the available commands.
Figure 41 Telnet Commands
4 To change a parameter follows the style:
• parameter value, for example:
ip 134.40.28.56
Then press [Enter], where parameter refers to the configuration parameter
you are defining, and value refers to the definitions you are assigning to that
parameter. Each parameter entry is followed by a carriage return.
Table 21 Telnet Commands
Value Description
? displays syntax and descriptions of commands
/ displays current LAN settings
ip <x.x.x.x> sets new ip address
sm <x.x.x.x> sets new subnet mask
gw <x.x.x.x> sets new default gateway
exit exits shell and saves all changes

Agilent Technologies 1260 Infinity II Refractive Index Detector Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity II Refractive Index Detector
Category	Laboratory Equipment
Language	English