Agilent Technologies 1260 Infinity II Refractive Index Detector User Manual

Agilent InfinityLab LC Series RID User Manual 53
3Using the Module
Detector Control Settings
Detector Control Settings
Figure 14 Control settings
The figure shows the default settings.
•Heater: Select the On option to switch the RID heater on. This parameter
requires setting the Optical Unit Temperature. Select the Off option to switch
the optical unit heater off.
• Analog Output Range: can be set to either 100 mV or 1 V full scale, for
additional settings see Analog Output (under “Method Parameter Settings” on
page 55).
•At Power On: When activated, the optical unit heater is turned on automatically
when the RID is switched on. For shortest equilibration times, Agilent
recommends to leave this function always on.

Agilent Technologies 1260 Infinity II Refractive Index Detector Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity II Refractive Index Detector
Category	Laboratory Equipment
Language	English