Agilent Technologies 1260 Infinity II Refractive Index Detector User Manual

Agilent InfinityLab LC Series RID User Manual 67
4 Preparing the Module
Setting up an Analysis
Conditions
A single injection of the isocratic test standard is made under the conditions
given in Table 7 on page 67:
Table 7 Chromatographic conditions
Mobile phases 30 % water, 70 % acetonitrile
Flow rate 1.5 mL/min
Stroke A 20 µL
Stop time 10 min
Injection volume 20 µL
Column compartment temperature 25 °C
Optical unit Temperature 35 °C
Polarity Positive
Peak Width (Response time) 0.2 min (4 s, standard)

Agilent Technologies 1260 Infinity II Refractive Index Detector Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity II Refractive Index Detector
Category	Laboratory Equipment
Language	English