Preparing for Use 2
16901A Logic Analysis System Service Guide 17
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
To connect multiple frames
If you need to make time-correlated measurements with
more logic analysis channels than can be installed into a
single logic analysis system frame, you can connect multiple
16900A, 16901A, and 16902A frames together. Refer to the
Installation Guide that came with your instrument for
Multiframe Pro configurations. To get the most up- to- date
installation guide:
• Go to www.agilent.com.
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
To install measurement modules
For general information on installing a measurement module
into the mainframe refer to the Installation Guide that came
with your instrument. To get the most up- to- date
installation guide:
• Go to www.agilent.com.
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
To clean the instrument
If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the external surfaces of the instrument with a soft
cloth dampened with a mixture of mild detergent and
water.
3 Make sure that the instrument is completely dry before
reconnecting it to a power source.
To Next Page
Loading...
Need help?
General
